If the chain is too short, it can stop the flapper from sealing the flush valve properly. The chain that runs from the flush lever to the flapper is another likely culprit. After you have installed the new flapper, your toilet should no longer run. This way, youРІР‚в„ўll have no problem matching the old flapper with a new one. We suggest bringing your current flapper with you to the hardware store. If you see cracks, discoloration, or warping, the flapper is faulty and needs replacing. The rubber should be smooth with no irregularities. Once itРІР‚в„ўs empty, unhook the flapper and examine it.

To check the condition of the flapper, flush the toilet and allow the tank to fully drain. If your tank never seems to fill-up, a worn flapper is most likely the issue. After years of use, the flapper can warp or become brittle, thus causing the seal to become ineffective. The flapper is a rubber cap that stops the water in the toiletРІР‚в„ўs tank from seeping out.

To do so, locate the silver knob, which is usually on the wall behind your toilet, and turn it until youРІР‚в„ўre certain the water supply is shut off.Р”Р„ll set? Okay, letРІР‚в„ўs get startedРІР‚В¦ The Flapper The steps provided below should solve your running toilet problem and save you from throwing money down the drain.Р”В«ut, firstРІР‚В¦ before you get started, turn off the water running to your toilet. A running toilet isnРІР‚в„ўt only annoying itРІР‚в„ўs also a waste of water and money! Luckily, fixing the problem isnРІР‚в„ўt too difficult if youРІР‚в„ўd like to take a stab at it before contacting your plumber.

How to fix a running toilet